Pontoon Decking and Flooring Options
CCA Treated Marine Grade Decking
Deck Joint Tape
Industry Standard 3/4" thick Decking
is available in 8' wide and 8'6" Wide. 1/2" is only available in 8' width.
Seals deck board joints where decking meets over a cross channel. Butyl tape prevents
water from seeping between deck boards and making the carpet wet from beneath the deck.
$20.00 Per 50' Roll
3/4" thick, 4'x8' - $125.00
3/4" thick, 4'x8'6" - $145.00
1/2" thick, 4'x8' - $95.00
Lumberyard Decking after only two seasons
All of our 3/4" decking is 7 ply, CCA treated and kiln dried. Decking is A faced so all knots are cut out and filled with football style plugs, and all imperfections in the decking face is filled and sanded. This gives you the smoothest possible surface for your flooring. Comes with a 50 year no rot warranty.
To Learn more about the difference between our CCA Treated Marine Grade Decking and that sold at your local lumber yard
Marine Grade Flooring Glue
Deck Screws (bag of 100)
$49.00
Our Marine Adhesive is specially formulated to work with our carpet and Marine grade plywood. Covers approximatly 12'x8' of deck space per gallon. Apply with a 1/8" V notched trowel.
$40 Per Gallon
Kit of 100, 5/8” round head, 1 7/8” long, self tapping. Installs from atop the deck. Requires air tools or a heavy-duty drill. Self-taps through decking and aluminum cross channel.
1/8" V Notched Trowel for Glue
$5.95
Elevator Bolts (1 1/2" or 3") Bag of 100
Sold 100 per bag. Elevator bolts have been used for years, but most manufacturers have switched to deck screws. Elevator bolts are flat on the top, drill the deck slide in the E-bolt and have someone under the deck tighten the nut.
Note: 3" E-Bolts are required on Crest Pontoons.
1 1/2" Long- $49
3" Long - $60
144 Mil Thick Woven Vinyl Flooring (SeaGrass Flooring)
Gray SeaGrass
Tan SeaGrass
Toffee SeaGrass
SeaGrass $40 per running foot (1'x8'6")
Beige Teak
Tan Teak
Gray Teak
Woven Teak $42 per running foot (1'x8'6")
Woven vinyl flooring has become extremely popular over the past few years. If you have been to any boat show since 2010 you have noticed almost every pontoon boat has this type of flooring. Woven vinyl has the durability of solid vinyl flooring but also the softness of carpet, and the ability to stay cool on the bare foot. Woven vinyl is sold under may different names SeaGrass, Infinity, MariDeck, etc. But they are all the same, they are made by weaving vinyl threads into a pattern and are adhered to a foam backer for softness. The good woven vinyl floors have felt adhered to the back of the foam, allowing the glue to grab the floor and adhere better to the deck, our woven vinyl has this.
50mil Vinyl Tuf-Deck Flooring
Gray Vinyl
Tan Vinyl
$27.00 per running foot (1'x8'6")
50 Mil Tuf-Deck flooring is .050" thick with a non skid surface. Color goes all the way through the vinyl and is not just coated with color like others. This flooring is the most rugged marine flooring available today. Great for fishing pontoons and bass boats alike. Has a felt backing which grabs the glue making sure your flooring is solidly held to the floor. If you are putting this down on a aluminum deck you will need a special solvent based glue as our glue will not work with this when installed on an aluminum deck.
22oz Cutloop Carpet
$15.50 per running Foot (1'x8'6")
Our Cutloop carpet is 22 oz thick and has a rubber backing. It has built in UV and mildew protection built into the fibers. Has a distinctive hook and loop pattern that looks great on any pontoon.
20oz CutPile Carpet
$14.50 per running Foot (1'x8')
Our Cutpile carpet is 20 oz thick and has a rubber backing. It has built in UV and mildew protection built into the fibers.